Equipment & Systems

Filters

Vertical High-Rate Sand Filter

The Vertical High-Rate Sand Filter is a versatile and efficient water filtration solution designed to remove a wide range of contaminants from water sources. Utilizing a carefully engineered sand-based filtration system, this filter effectively traps sediment, debris, and other impurities, ensuring the delivery of clean, clear water.

The Vertical High-Rate Sand Filter is easy to maintain and ensures consistent water quality. Its compact design makes it suitable for a variety of applications.

More Info

Horizontal High-Rate Sand Filters

The Horizontal High-Rate Sand Filter is a robust and efficient water filtration system designed to remove a wide range of contaminants from water sources with enhanced performance. The filter's horizontal design may allow for a better fit in existing mechanical rooms.

The filter's construction utilizes high-quality materials, ensuring durability and long-lasting performance. The sand bed, strategically layered with various grades of media, effectively traps suspended solids, organic matter, and other impurities, delivering clean, clear water.

More Info

Filters for Small Pools, Therapy Pools, and Fountains

Triton II Side Mount Filters are the original and still the industry standard. Our unique process creates a one-piece, fiberglass-reinforced tank with UV-resistant surface finish for years of unequaled strength and durability. This unique method locks in fiberglass, preventing fibers from "blooming" under harsh conditions.

More Info

Custom Filters

Custom Steel Sand Filters

Custom steel sand filters are a versatile and efficient solution for water filtration needs. Constructed with high-quality steel, these filters are designed to withstand the rigors of continuous use while providing reliable performance. We use a proprietary cured PVC coating. With a range of customizable options, such as flow rate and pressure capabilities, these filters can be tailored to meet the specific requirements of virtually any water filtration system. Custom filters are backed by the same Swimtime commitment to quality as our standard filters.

Contact Us

Mechanical Room

Chemical Treatment

  • When it comes to sanitizing power, the Accu-Tab® Chlorination System, when used with Accu-Tab Blue SI tablets, brings proven technology to a broad range of applications killing pathogens, controlling algae formation, destroying organic contaminants and maintaining chlorine residuals.

    Manufactured in the U.S., the NSF-certified system combines erosion-adjusted calcium hypochlorite tablets with a controllable water flow and sieve plate design resulting in consistent chlorine delivery to meet the most demanding requirements.

    Minimizing safety concerns typically associated with other chlorination systems, the Accu-Tab system reduces the risk of leaks, eliminating the need for HAZMAT safety equipment and training that comes along with gas chlorine, or a containment structure for liquid chlorine use.

  • Proper pH balance is easier than ever with the Acid-Rite® pH Adjustment System.

    Powered by innovative tablet-erosion technology, Acid-Rite is an effective alternative to bulky liquid acid systems, CO2 and cumbersome granular sodium bisulfate bags.

    The system provides reliable pH balancing combined with easy installation and maintenance. Acid-Rite tablets, made of sodium bisulfate, have low odor, creating a friendlier working environment for pool operations.

    Unlike muriatic or sulfuric acid, Acid-Rite tablets don’t cause fuming that can attack expensive equipment like chemical controllers.

    When combined with the Accu-Tab Chlorination System, operators gain a more practical one-two punch in maintaining water quality at aquatic facilities of any size.

  • Since 1957 Stenner Pumps has established an impeccable reputation as the manufacturer of the very best metering pumps in the industry. Stenner pumps are uniquely designed for the water treatment industry, including municipal applications, cooling towers, car washes and pools. Based on a simple, well-engineered design that minimizes complexity and delivers outstanding performance, the time-tested Stenner design is known for exceptional reliability and ease of service, which increases dependability for users, while reducing service time and expense.

Chemical Controllers

  • Chemical Automation is now recognized as a must for many water treatment applications such as swimming pools, spas, cooling towers, and industrial water treatment. With their advanced microprocessor-based technology, the Chemtrol 250, 1500, and 2100 Digital controllers, introduce a new standard of sophistication in automated chemical control.

Flow Meters

  • Seametrics iMAG industrial flow meters are all flanged inline magmeters that come standard with one pulse output but includes additional options for other outputs. Capable of being battery or externally powered as well. Our WMP-Series is a plastic-bodied industrial flow meter that uses battery-power and functions simply as a magnetic flow meter. The EX-Series industrial magmeters are adjustable and fixed insertion magmeters. Several models are available in brass and stainless steel. PE-Series low-flow magmeter is chemical and corrosion resistant. This model does not require a straight pipe and features no moving parts. Seametrics also produces saddle, tee, and weld-type fittings for our magmeters.

  • Ingenious in concept and flawless in operation, FlowVis® flow meters have been revolutionizing the way flow is measured in pool and spa applications since their inception in 2012.

    With unrivaled accuracy, greater installation flexibility, and more NSF 50 certified models than any other brand, it’s easy to see why FlowVis® is the flow meter of choice for pool and spa professionals everywhere.

  • Flow rate measurement is a critical parameter in many fluid applications. Blue-White® manufactures robust, precise industrial-grade flow meters to measure fluid volume accurately, ensuring smooth, safe, and cost-effective processes. Blue-White® offers variable area flow meters (rotameters), paddlewheel, and ultrasonic flow meters, all Made in the USA and ready to ship!

  • McCrometer flow meters offer unbeatable value in cost of installation and ownership, and serve a diverse market with flow measurement solutions to fit each customer’s application needs. Listening to customers and innovating unique solutions is our specialty. McCrometer's V-Cone Flow Meter, an advanced dP meter, is used in many industrial applications where accuracy, low maintenance and cost are critical.  

Valves

  • Modulating float valves manufactured by SwimTime® are designed for application at the terminus of gravity flow horizontal main drain lines of an aquatic facility, normally terminating in a surge or balance tank. The purpose of a surge or balance tank is to provide a reservoir to receive water that has been displaced by bathers entering the pool. The purpose of the modulating float valve is to help “balance” the flow of water coming from the surface (skimmers or perimeter gutter) and the bottom (main drain) of the pool. When the pool is not in use, the vast majority of water entering the surge tank comes through the main drain at the pool bottom. When the circulation system of the pool is running, the surge tank will achieve a standard operating level. When bathers enter the pool, the water they displace flows through the surface skimmers or gutter and into the surge tank, raising the water level in the tank. When the water in the tank rises, the float on the valve rises, closing the valve on the main drain line and reducing the amount of water coming from the main drain equal to the amount now entering the tank through the surface, effectively maintaining a reasonably consistent operating level in the tank. Modulating float valves manufactured by SwimTime® are not positive shut-off valves and are designed to allow app. 5 - 10% open when the float is in the full up (valve closed) position.

  • The Bray Series 30 Wafer and Series 31 Lug style resilient seated butterfly valves feature a one-piece body with a high-strength through stem design utilizing an internal disc to stem connection.
    The Series 30/31 is engineered to provide bidirectional bubble-tight shutoff and isolation of the line media from the stem and valve body.
    Available with a wide selection of high-quality resilient seat & disc materials for a variety of applications, our Series 30/31 butterfly valves are easily automated for on-off or modulating service. 

  • Thermoplastic Butterfly Valves 2" - 8" are wafer style to fit between ANSI B16.5 Class 150 flanges. Disc is smooth and contoured for lowest possible pressure drop (highest Cv). Shaft is 410 S.S. and of one piece, through shaft design, with square drive through entire length of blade. 2" - 6" valves shall be complete with a spring loaded 15 position latch lever.

Pumps

  • Aurora end suction, centrifugal pumps are well suited to swimming pools. 1200 or 1800 rpm, 230/460V three phase, 50/60 Hz drip proof motors close coupled to a cast iron, bronze fitted pump.

  • Pentair C series self-priming pumps are specifically designed for pool service. Unit is complete with integral hair and lint strainer.

    Pentair EQ Series commercial pumps are designed for maximum efficiency and quiet operation. They are the only non-corrosive, all plastic pumps designed for the commercial pool and water applications market. EQ Series impellers allow for lower loads and longer motor life. These are priced with a 6”x6” strainer pot.

  • Paco Model LC end-suction, centrifugal pumps are cast iron/bronze fitted construction, close coupled to 1750 rpm, 230/460V, 3 phase, 50/60Hz ODP motors. Paco pumps are NSF-61 certified, the only pumps in the industry so certified, and can be upgraded to NSF-50 at additional cost.

  • The PowerFlo II pump has been quality built and engineered to give you many years of efficient performance, in entry level markets.

  • The Speck line of commercial products is setting new standards for energy efficiency and ease of installation. Engineered to ensure durability, superior high flow performance and quiet operation, these pumps are designed for use in commercial pools & spas, waterparks and aquatic centers.

Heaters

  • Raypak’s Hi Delta is easy to install, operate and service. The Hi Delta has a patented burner with an innovative design that provides an optimized air-gas pathway for complete combustion. This makes the Hi Delta the most adaptable sealed-combustion heater on the market today. The touch panel display on the Hi Delta includes onboard diagnostics. In the event of any system problems, technicians can quickly review the fault history of the unit. 

  • UltraTemp® Heat Pump for Commercial Applications

    The industry's first heat pump charged with non-ozone depleting refrigerant, R410A.

    • Available in three phase model

    • 100% pure titanium heat exchanger assures corrosion-free performance for extra long life

    • LCD control board displays an intuitive menu-drive read out with easy to follow full word messages.... no more codes

    • AutoSet (time clock over-ride) feature monitors water temperature and turns the water circulation pump on and off as needed to maintain desired pool temperatures

    • Automatic defrost feature senses refrigerant temperature and prevents freezing, allowing the heat pump to operate at even lower temperatures

    • Compatible with ALL automated control packages

    • Long-life corrosion resistant plastic composite cabinet stands up to severe climates and pool chemicals

    • Emerson Copeland Scroll Compressor on 60 Hz, single phase models

    • ETL listed for safe operation

    • Thermostatic Expansion Valve (TXV) controls refrigerant flow for optimum efficiency and BTU output over a wider operating range

    • Highest efficiency available, meets or exceeds existing codes

    • BTU and efficiency performance independently certified by the Air-Conditioning, Heating and Refrigeration Institute, AHRI

  • Laars Heating Systems Company is an American company with its manufacturing facilities located in the United States of America. Products made by Laars are manufactured in the United States using the finest raw materials and components from around the world to deliver the highest quality and value to its customers.

  • AQUAS Commercial Pool Package offers skid mounted design with indirect pool heat exchanger.

    • 15 Standard Models, 285,000 - 2,000,000 Btu/hr

    • 6 Engineered-to-Order Models from 2,500,000 - 6,000,000 Btu/hr

    • Up to 98% Thermal Efficiency

    • Indirect Pool Heat Exchanger Design

    • Compatible with Chemical or Salt Chlorine Generator Systems

  • Coates has been the name to trust for quality and reliability in water heating equipment since the 1940s and continues to lead the industry in quality and performance across our entire line of swimming pool products.

    Our pool and spa heaters are available from 1.5kW to 57kW and most can be ordered in single or three phase models. For large commercial applications we also offer heaters up to 300kW.

Deck Equipment

Swimtime offers a wide range of commercial aquatic equipment replacement parts and services to meet the needs of our customers. Our team of experts can help you identify the right replacement components for your existing systems. Contact us today to learn more about our aquatic equipment replacement offerings and how we can support the needs of your business. 

Umbrellas

  • The Kemp USA Umbrella is made of durable weather-resistant nylon with a vinyl laminate covering to protect it against the elements. Diameter of the umbrella spans 6 ft. Height is 7 1/2 ft. aluminum pole with push button tilting device. Diameter of umbrella pole is 1 3/8”.

Pool Furniture

  • Taylor & Associates has been providing customers with a wide selection of commercial outdoor furniture for over 35 years.

    Practicality, simplicity, and elegance are at the heart of the Taylor & Associates outdoor furniture product line.

    ​Commercial Outdoor Furniture for Hotel Pools, Water Parks, Theme Parks, Apartment Communities, Municipal Parks and Beaches Nationwide.

Lifeguard Chairs

  • Top picks by the YMCA, US military bases and water parks. Terrific gifts for former Lifeguards. Eight models to choose from with seat heights ranging between 30" and 64"
    All Lifeguard Chairs come complete with: cup and umbrella holders (umbrella holder has a 1 5/8” diameter opening). Umbrella not included.
    Some assembly required. Now Available: Wheel Kits and Anchor Boards! All steps and platforms have a textured surface. They even float!

    Tailwind Furniture recycled plastic lifeguard chairs are virtually maintenance free, fade-resistant, and can withstand any climate. Manufactured from High Density Polyethylene (HDPE 2). Tailwind Furniture lifeguard chairs will not rot, splinter or absorb moisture. More importantly, each pound of furniture prevents 10 milk containers from entering our landfills. https://www.tailwindfurniture.com/lifeguard-chairs

  • Paragon "Lookout Chairs" have grown into an extended family of their own with 5 models designed for pools that do not require a full height chair. All Lookout chairs offer an elevated, 360 degree swivel seat which sits on a non-skid platform. Station provides easy access and dismount. Chair is molded plastic. Features T304 stainless steel construction. All models come with an umbrella holder and the 3-step also has a rescue tube holder. 4" diameter wheels are included on 2- and 3-step models for portability.

    https://www.pentair.com/en-us/products/business-industry/commercial-pool-products/commercial-pool-deck-equipment/lookout-lifeguard-chairs

  • S.R.Smith offers a wide range of portable and permanent lifeguard chairs to ensure everyone’s safety in the pool.

    https://www.srsmith.com/en-us/products/commercial-products/lifeguard-chairs/

  • Astral Portable Lifeguard Chair, 6 Ft., Stainless Steel Features:

    The 6-foot height provides lifeguards with an elevated and adjustable position for clear visibility across the pool

    Designed for comfort during long hours of duty, the chair provides a supportive seat and backrest

    Features a non-slip platform, offering a secure footing for lifeguards even in wet conditions

    Allows for easy relocation of the lifeguard station to different areas of the pool deck

    Fluidra strives to deliver the perfect pool experience that enhances comfort, enjoyment, and peace of mind for pool owners.

    https://app.redpepperdigital.net/a10/publications/2025-product-catalog/1

Hand Rails & Ladders

Diving Towers & Boards

Starting Platforms

Pool Lifts

  • Aqua Creek is an innovative company and we are the originator of the industry changing, Pro Pool Lift™ design that is copied by many but never replicated. Aqua Creek is the only source you need for original, high quality and innovative pool access lifts.

    https://aquacreekproducts.com/pool-lifts/

  • We help people ... in and out of water ... with water.

    Water flows in....the seat goes up.
    Water flows out...the seat goes down.

    https://aquaticaccess.com/

  • S.R.Smith's ADA compliant pool lifts and full line of handicap accessible products ensure that everyone can enjoy being in the pool!

    https://www.srsmith.com/en-us/products/pool-access-products/pool-lifts/

Slides & Features

  • The Vortex pool slide is big time fun that's perfect for commercial or high-end residential applications. The Vortex is available with an open- or closed-flume slide, with a ladder or a spiral staircase - you decide! Standing at over 10 feet tall this CPSC compliant pool slide's high-volume water delivery system gives you up to 30 gallons of water per minute - now that's big time fun! 

    https://www.srsmith.com/en-us/products/pool-slides/vortex/

Ropes, Floats, & Lanes

Lifeguard & Safety

Water Rescue

Recreation

Deck Equipment Suppliers

Paragon, SR Smith, DuraFlex, Pentair, Tailwind, First Team, Vaupell, Competitor, Colorado Timing System, Kemp, Permacast, Meyco, Maxi Sweep, Aqua Creek, Aquatic Access, Triad

Contact us today for package offerings specific to your project.